Skip to main content

All information about your Black Dwarf Pro G5 (Rev. 1)

Important notes

You need a valid licence to be able to operate the appliance. You cannot access the web interface without a licence key. Download your licence at my.securepoint.de.

 

Update the UTM firewall to the latest firmware before putting it into operation.

 

Here you will find information on licensing:
Securepoint Licence Agreement

 

Important note on commissioning a Securepoint UTM

Before using a Securepoint UTM for the first time, the firmware must be completely reinstalled.

This is the only way to ensure that:

  • the current system version and also current secure basic settings are used,
  • all security-relevant updates are included,
  • the hardware is fully supported
  • and tampering during transport or storage are excluded.

Preparation

  • Have the access data of the Internet provider or network information (e.g. IP address of the router) ready
  • Create a USB stick with the latest installation image (via the Securepoint Imaging Tool)

Procedure

  1. Start device with monitor and keyboard, change boot sequence to USB if necessary
  2. Carry out the installation
  3. After completion: Restart and log in via the web interface
  4. Carry out basic configuration and network connection
  5. Reset the boot sequence in the BIOS so that the UTM starts regularly from the hard drive in future

     

 Important:

Commissioning without prior reinstallation can lead to malfunctions and represents a safety risk.

 

Additional steps

  1. Configure your own computer with an IP address from the range: 192.168.175.2 to 192.168.175.254 (network mask: 255.255.255.0)
  2. Connect your own computer to the A1 interface on the appliance
  3. Call up the web interface of the appliance at 192.168.175.1
  4. Login data for factory settings User name: admin Password: insecure
  5. The installation wizard helps you set up the UTM firewall
KEINE SERIENNUMER

Data

Specifications Black Dwarf Pro G5 (Rev. 1)

Maximum 15 users

  • LAN-Ports: 4 x 1 GBit/s
  • WiFi/WLAN: 2,4 oder 5 GHz, 802.11 n/ac
  • LTE/UMTS (optional): Main line or fallback
  • Connections: HDMI, 2 x USB 2.0
  • Hard disk: SSD
     
  • Form factor: Desktop (B 21 x H 4,4 x T 10,5 cm)
  • Power supply: Extern: 110-240V; 50-60Hz; 1,2 A; optional second power supply unit; power connection: 2 V; 3,34 A; 40 W; screwed
  • Power consumption max.: ~46 Watt
     
  • Temperature: 0°C - 40°C (Operation) / -20°C - 60°C (Storage)
  • Humidity: 10 % ~ 80 %, non condensing
  • Firewall throughput: 2830 MBit/s
  • VPN throughput: 420 MBit/s
  • TLS-Interception: 900 MBit/s
  • AES hardware acceleration: yes (Intel)
     
  • Extension options:
    • LTE/UMTS: main line or fallback
    • Rackmount kit for mounting in 19" rack, 1U
    • Premium rackmount kit for mounting in a 19" rack, 1U; with lead-out of the LAN ports and holder for the power supply unit

19“ Rack-Montage

Zum Einbau der Firewall in ein 19" Rack stehen zwei 1HE-Optionen zur Verfügung.

  • Rackmount-Kit Basic ist die einfachste Möglichkeit für den Einbau in eine 19" Rack.
  • Rackmount-Kit Premium kommt mit Herausführungen der 4 LAN-Port nach Vorne und einer Halterung für bis zu zwei Netzteile. 

Die Premium-Variante ist ausschließlich für die Hardware der Generation "G5" konzipiert.

LTE-Upgrade

Mit diesem leistungsstarken 4G/LTE-Modem im USB-Gehäuse (inklusive zwei Antennen) kann der Funktionsumfang der Firewall einfach erweitert werden. Die Mobilfunkverbindung lässt sich als Hauptleitung oder Fallback konfigurieren und benötigt eine gesonderte SIM-Karte mit aktivem Vertrag.

For reliable operation of our hardware throughout its life expectancy, it must be operated within its specifications. 

The maximum ambient temperature for operation is 40°C* and minimum operation is possible at 0°C*. 


During installation, ensure that the firewall is mounted/set up as follows:

  • Sufficient supply of cool air
  • Do not cover the unit
  • The unit must be as free-standing as possible

 

When mounting in a network cabinet, pay particular attention to:

  • Ventilate the cabinet
  • Do not place the appliance under or above heat-emitting appliances
  • Do not allow heat to build up

*The relative humidity must be between 10% and 80% and must not condense.