All informations for your RC400R G5 (Rev. 1)
You need a valid licence to be able to operate the appliance. You cannot access the web interface without a licence key. Download your licence at my.securepoint.de.
Here you will find information on licensing:
Securepoint Licence Agreement
Important note on commissioning a Securepoint UTM
Before using a Securepoint UTM for the first time, the firmware must be completely reinstalled.
This is the only way to ensure that:
- the current system version and also current secure basic settings are used,
- all security-relevant updates are included,
- the hardware is fully supported
- and tampering during transport or storage are excluded.
Preparation
- Have the access data of the Internet provider or network information (e.g. IP address of the router) ready
- Create a USB stick with the latest installation image (via the Securepoint Imaging Tool)
Procedure
- Start device with monitor and keyboard, change boot sequence to USB if necessary
- Carry out the installation
- After completion: Restart and log in via the web interface
- Carry out basic configuration and network connection
Reset the boot sequence in the BIOS so that the UTM starts regularly from the hard drive in future
Important:
Commissioning without prior reinstallation can lead to malfunctions and represents a safety risk.
Additional steps
- Configure your own computer with an IP address from the range: 192.168.175.2 to 192.168.175.254 (network mask: 255.255.255.0)
- Connect your own computer to the A1 interface on the appliance
- Call up the web interface of the appliance at 192.168.175.1
- Login data for factory settings User name: admin Password: insecure
- The installation wizard helps you set up the UTM firewall
Data and videos
Specifications RC400R G5 (Rev. 1)
Maximum 500 users
- LAN ports: 8 x 1 GBit/s (max. 24)
- SFP ports (OnBoard): 2 x 1 GBit
- Expansion slots: 2 x slot
- Slot B: 8x 1 GBit/s RJ-45
- Slot C: 4x SFP+, 10 GBit/s / 8x 1 GBit/s RJ-45
- Connections: 1x VGA (rear), 2 x USB 3.0, console port
- Hard disk: SSD, hardware Raid 1
- Form factor: 19", 1 HE (W 43 x H 4.4 x D 47.5 cm)
- Mounting: Premium telescopic rails
- Power supply: Internal, redundant, hot swappable
- Power supply (internal): 110-240V; 50-60Hz
- Power consumption: max. ~360 Watt
- Temperature range: 0°C - 40°C (operation) / -20°C - 60°C (storage)
- Humidity: 10 % ~ 80 %, non-condensing
- Firewall throughput: 25 GBit/s
- VPN throughput: 3,5 GBit/s
- HTTP proxy with AV: 1,4 GBit/s
- AES hardware acceleration: yes (Intel)

Erweiterungskarten
Diese UTM-Firewall der Enterprise-Klasse verfügt auf der Vorderseite über zwei Einschübe, um eine Erweiterungskarte aufnehmen zu können.
Zur Auswahl stehen Karten mit 8-Port 1 GBit/s Ethernet (RJ-45) und 4-Port GBIC für SFP+ 10 GBit/s Module (SR oder LR).

LTE-Upgrade
Mit diesem leistungsstarken 4G/LTE-Modem im USB-Gehäuse (inklusive zwei Antennen) kann der Funktionsumfang der Firewall einfach erweitert werden. Die Mobilfunkverbindung lässt sich als Hauptleitung oder Fallback konfigurieren und benötigt eine gesonderte SIM-Karte mit aktivem Vertrag.