Thank you very much,

that you have chosen a Securepoint product.

Interface A1

For the initial installation, connect the computer to interface A1 on the appliance.

HDMI connection

There is an HDMI connection on the back for connecting a monitor.

USB ports

A keyboard, for example, can be connected directly via the USB ports.

All information about your RC100 G5 (Rev. 2)

Important notes

You need a valid licence to be able to operate the appliance. You cannot access the web interface without a licence key. Download your licence at my.securepoint.de.

Update the UTM firewall to the latest firmware before putting it into operation.

Here you will find information on licensing:
Securepoint Licence Agreement

Important note on commissioning a Securepoint UTM

Before using a Securepoint UTM for the first time, the firmware must be completely reinstalled.

This is the only way to ensure that:

the current system version and also current secure basic settings are used,
all security-relevant updates are included,
the hardware is fully supported
and tampering during transport or storage are excluded.

Preparation

Have the access data of the Internet provider or network information (e.g. IP address of the router) ready
Create a USB stick with the latest installation image (via the Securepoint Imaging Tool)

Procedure

Start device with monitor and keyboard, change boot sequence to USB if necessary
Carry out the installation
After completion: Restart and log in via the web interface
Carry out basic configuration and network connection
Reset the boot sequence in the BIOS so that the UTM starts regularly from the hard drive in future

Important:
Commissioning without prior reinstallation can lead to malfunctions and represents a safety risk.

Additional steps

Configure your own computer with an IP address from the range: 192.168.175.2 to 192.168.175.254 (network mask: 255.255.255.0)
Connect your own computer to the A1 interface on the appliance
Call up the web interface of the appliance at 192.168.175.1
Login data for factory settings User name: admin Password: insecure
The installation wizard helps you set up the UTM firewall

Installation instructions (Wiki)

Restore instructions (Wiki)

UTM Documentation (UTM)

Manual (PDF)

KEINE SERIENNUMER

Serial number search
More information about the hardware and the warranty status.

data and videos

Specifications RC100 G5 (Rev. 2)

Maximum 25 users

LAN ports: 4 x 2,5 GBit/s
WiFi/WLAN: 2,4 oder 5 GHz, 802.11 n/ac
LTE/UMTS (optional): Main line or fallback
Connections: HDMI, 2 x USB 2.0
Hard disk: SSD
Form factor: Desktop (B 21 x H 4,4 x T 10,5 cm)
Power supply: External: 110-240V; 50-60Hz; 1,2 A; optional second power supply unit; power connection: 2x 12 V; 3,34 A; 40 W; screwed
Power consumption max.: ~46 Watt
Temperature range: 0°C - 40°C (operation) / -20°C - 60°C (storage)
Humidity: 10 % ~ 80 %, non-condensing
Firewall throughput: 3740 MBit/s
VPN throughput: 690 MBit/s
TLS interception: 1800 MBit/s
AES hardware accerleration: yes (Intel)
Expansion options:
- Second power supply unit for redundant power supply
- LTE/UMTS: Main line or fallback
- Rackmount kit for mounting in 19" rack, 1U
- Premium rackmount kit for mounting in 19" rack, 1U; with LAN port lead-out and holder for up to two power supplies

19" rack mounting

Two 1U options are available for installing the firewall in a 19" rack.

Rackmount-Kit Basic is the simplest option for installation in a 19" rack.
Rackmount-Kit Premium comes with 4 LAN port outlets to the front and a holder for up to two power supply units.

The premium version is designed exclusively for the "G5" generation hardware.

LTE upgrade

With this powerful 4G/LTE modem in a USB housing (including two antennas), the range of functions of the firewall can be easily expanded. The mobile connection can be configured as a main line or fallback and requires a separate SIM card with an active contract.

Data sheet hardware (PDF)

UTM firewall brochure (PDF)

For reliable operation of our hardware throughout its life expectancy, it must be operated within its specifications.

The maximum ambient temperature for operation is 40°C* and minimum operation is possible at 0°C*.

During installation, ensure that the firewall is mounted/set up as follows:

Sufficient supply of cool air
Do not cover the unit
The unit must be as free-standing as possible

When mounting in a network cabinet, pay particular attention to:

Ventilate the cabinet
Do not place the appliance under or above heat-emitting appliances
Do not allow heat to build up

*The relative humidity must be between 10% and 80% and must not condense.