All information about your Black Dwarf G5 (Rev. 2)
You need a valid licence to be able to operate the appliance. You cannot access the web interface without a licence key. Download your licence at my.securepoint.de.
Here you will find information on licensing:
Securepoint Licence Agreement
Important note on commissioning a Securepoint UTM
Before using a Securepoint UTM for the first time, the firmware must be completely reinstalled.
This is the only way to ensure that:
- the current system version and also current secure basic settings are used,
- all security-relevant updates are included,
- the hardware is fully supported
- and tampering during transport or storage are excluded.
Preparation
- Have the access data of the Internet provider or network information (e.g. IP address of the router) ready
- Create a USB stick with the latest installation image (via the Securepoint Imaging Tool)
Procedure
- Start device with monitor and keyboard, change boot sequence to USB if necessary
- Carry out the installation
- After completion: Restart and log in via the web interface
- Carry out basic configuration and network connection
Reset the boot sequence in the BIOS so that the UTM starts regularly from the hard drive in future
Important:
Commissioning without prior reinstallation can lead to malfunctions and represents a safety risk.
Additional steps
- Configure your own computer with an IP address from the range: 192.168.175.2 to 192.168.175.254 (network mask: 255.255.255.0)
- Connect your own computer to the A1 interface on the appliance
- Call up the web interface of the appliance at 192.168.175.1
- Login data for factory settings User name: admin Password: insecure
- The installation wizard helps you set up the UTM firewall
Data and videos
Specifications Black Dwarf G5 (Rev. 2)
Maximum 10 users
- LAN-Ports: 2 x 1 GBit/s
- WiFi/WLAN: 2,4 oder 5 GHz, 802.11 n/ac
- Connections: HDMI, 2 x USB 3.0
- Hard disk: MMC
- Form factor: Desktop (B 11,5 x H 3,2 x T 11,5 cm)
- Power supply: Einfach
- Power supply unit (intern): 110-240V; 50-60Hz
- Power consumption: ~15 Watt
- Temperature: 0°C ~ 40°C
- Humidity: 10 % ~ 80 %
- Firewall throughput: 1850 MBit/s
- VPN throughput: 310 MBit/s
- TLS-Interception: 300 MBit/s
- AES hardware acceleration: ja (Intel)

LTE-Upgrade
Mit diesem leistungsstarken 4G/LTE-Modem im USB-Gehäuse (inklusive zwei Antennen) kann der Funktionsumfang der Firewall einfach erweitert werden. Die Mobilfunkverbindung lässt sich als Hauptleitung oder Fallback konfigurieren und benötigt eine gesonderte SIM-Karte mit aktivem Vertrag.